2008 Workshops...
United Kingdom Sweden Read in Flemish Read in Danish Read in Dutch / Flemish read in deutsch Read in French Italia Norway Spain Poland Andorra Austria Bulgaria Czech Repbublic Greece Ireland Liechtenstein Lithuania Malta Portugal Russia Slovinia Turkey Ukraine Yugoslavia Explorers Club


Call for Presentation
Have you a subject you wish to speak about at the next conference. We are always looking for interesting speakers with interesting subjects see our request to be a speaker information here >>

eurotekpodcasts click here
Latest Podcast Interviews
Rick Stanton
Richard Stevenson
Phill Short
More info >

Check out our sponsors

Event Venue is at the ICC
click here to see the venue
see more pictures >> 






2008 Workshops & Technical Sessions
This is what the workshop agenda looked like at the 2008 event.
Side mount rebreathers & Micro rebreathers

This workshop wasrun by Rick Stanton aims to introduce people to the concept of side mount rebreathers & will look at a couple of currently used units, their design criteria, advantages, mounting, configuration & use from both a stand alone & multiple redundant rebreather viewpoint.
More information >>
side mount rebreather
Rick Stanton will run a workshop on side mount rebreathers

Gas Boosting workshop

Stansted Fluid Power have been at the forefront of gas booster technology for over 30 years. One of a handful of companies worldwide operating in pressures of up to 14,000 bar,with Oxygen to 7000 bar. In the past few years this technology has been made available to Technical divers and company representatives will be on hand at EuroTek.08 to demonstrate the safe practices of gas boosting and systems available.
More information >>

Mini Stansted Fluid booster pump from Stansted Fluid

Getting Started in Technical Diving

One of the most difficult aspects of Technical Diving is where to go once you have completed your course to to actually use the skills and equipment you have invested in. Paul Mee & Neil Plant will be on hand at EuroTek.08 to deliver a workshop on the topic of where to take your diving once you have become a qualified technical diver. This workshop will tell it as it is and provide lots of useful information that will hopefully provide you with some great diving for many years after you are qualified.More information >>
Click here for more information

CCR safety procedures
Sponsored at EuroTek by Kent Tooling
This workshop was taken by renowned Technical diving instructor Phill Short who focused upon the safety procedures of closed circuit rebreather diving. Phill will work through the fundamental practice of safe methods of putting your CCR together what to do and what not to do and above all highlight points that could prevent a serious accident. Phill has a massive amount of experience teaching students and also notes bad practice from established divers which he feeds back into his training protocols. This is an excellent workshop for new CCR divers as well as those that have experience in the field and need to refresh their safety skills.
More information >>

Kevin Gurr Choosing the right rebreather -An in-depth look
by Kevin Gurr

Kevin Gurr took a look at the technical questions to ask when considering buying and using a rebreather for advanced diving.
Everything from breathing performance to maintenance; based on 15 years of in-field experience on the subject and his role as a rebreather designer.
Kevin takes the rebreather concept apart and explains it advantages and limitations.

Bill Smith behind the computer on a shipwreck expedition Wreck Location workshop
with Bill Smith

Bill is an expert in wreck location who has discovered several historic wreck sites underwater as well as undertaken work for the police to locate underwater evidence in specific murder cases. This workshop focused on aspects of equipment and how best to use it to find that exclusive shipwreck that may have eluded you for many years.
For more information about Bill click here >>

John Lamb

Oxygen Senser workshop with Vandagraph
“Examining the myths and misunderstandings of Oxygen sensors”
with John Lamb
Vandagraph supplies Teledyne oxygen sensors to several re-breather manufacturers and has concentrated exclusively on the manufacture and distribution of gas measurement products priding itself on reliable service and technical support. At EuroTek 2008 John run a workshop on the subject of sensors. More information >>


Workshop 'High Definition filming for Technical Diving'
With Doug Friday speaker profile>>

Based upon the recent filming of the 08 Cocklebiddy Cave Exploration, this workshop was intended to guide current and future users of High Definition Video through the minefield of operating this technology within the realms of technical diving. More Information >>
click to enlarge image

Rich Stevenson

Megalodon Rebreather Workshop
by Rich Stevenson

Rich Stevenson welcomed you to his 45 minute presentation aimed at new and existing Meg divers and prospective owners. Topics covered were Inboard / Off board bailout cylinder configuration, initial set up tips, and their will also be the new APECS 2.7 Meg with Shearwater Decompression built in. At the end of the presentation Rich discussed how he safely dived his Meg to 155m on the Carpathia last year.


DPV Workshop

Rich Stevenson took a workshop on the use of scooters. This workshop focused on the correct use of Submersion Scooters preparation and maintenance. Rich also focused on the best methods of using DPV's (diver propulsion units) in both cave and wreck diving environments.

Getting Started in CCR diving - Workshop

Well known television presenter of the Deep sea Detectives series Richie Kohler ran a workshop on getting started in CCR diving and what differences you are likely to encounter as you begin the switch from Open Circuit. This was an excellent workshop for EuroTek delegates who are interested in making the change from traditional open circuit to closed circuit rebreathers.

Manufacturers Product Update Workshops

Custom Divers New Product update with MD Alex Vassallo

Alex Vassallo is the managing director of Custom Divers Ltd, a company that specializes in technical and advanced diving equipment. Alex is a deep wreck diver himself and organised an expedition to locate HMS Russell off Malta, he has also been on expeditions to the Lusitania and dives regular virgin deep wrecks in the English Channel. At EuoTek.08 he ran a product update workshop on new Custom Divers equipment and exhibiting a range of products. He also showcased a new design in SMB with safety for lost divers technology as well as new torch's and wings. Alex also discussed these new innovations in detail.


 
 
© Eurotek Diving Technologies Conference 2008-2010